Home > DVR-4TN/8TN/16TN
Please follow the steps to set the Internet security settings appropriately.
Now, you can continue with the rest of the SpecoRemote installation.
Start Internet Explorer to initiate the installation of SpecoRemote on your computer.
When the software
is completely downloaded, the Login Screen is now displayed.
You can log in
using the <Admin> or <User> account. <Admin> accounts
can perform ALL functions, while <User> account has limits.
One “Admin”
and up to four “Users” can access a DVR at the same time.
The following steps demonstrate
procedures to view video from remote unit:
Login Type | ||
Default User name | admin | user |
Default Password | 1234 | 4321 |
Click <OK> to log in to the remote DVR The process may take a few seconds.
When you successfully connect to a unit, the SpecoRemote main window displays as follows. The connected cameras of the remote unit will be listed on the left and an array of camera output windows displayed on the right of the main window.
To view the main window in full-screen view, press <F11> on your keyboard.
You can view
live video from the cameras attached to the remote unit by clicking
<Live> button on the main window toolbar.
You can select desired display mode and assign wanted camera view to the window(s) after the view on the DVR is displayed on the main window.
|
|
The software allows you to take a snapshot through the hot key on the top side of the main window. Each click takes a snapshot and it will be saved into a *.BMP file on the desktop of you PC. The snapshot file will be named as “Snapshot-*”.
To access the Playback screens, click <Play> button on the main window toolbar. There are three tabbed screens are contained in the Playback screens: <Remote Playback>, <Local Playback> and <Verify> tabs. The <Remote Playback> allows you to play back from a remote unit. The <Local Playback> enables you to play back a recorded video file with SpecoRemote that was downloaded and stored on the hard disk drive of your PC.
To save remote video, click <Play> on the top of the main window toolbar, and then <Remote Playback> tab. The <Remote Playback> screen will then be displayed.
Then tick the <Download *.DRV> box. A window will pop up asking where you want to save it and give it a filename.
Check the camera number(s) you wish to save then click OK.
To view remote
video, click <Play> on the top of the main window toolbar, and
then <Remote Playback> tab. The <Remote Playback> screen
will then be displayed.
The <From>
and <To> on the top of the screen display the date and time from
which recorded video is available for playback.
To play back remote video segments,
follow these steps:
The <Local
Playback> tab allows you to play back *.drv video files that stored
on your PC's hard drive.
Click the <Local
Playback> tab in the <Playback> screen for displaying downloaded
video. The Local Playback screen is shown as below.
Follow below steps to play back a downloaded *.drv file with SpecoRemote.
When playing
back local or remote video, SpecoRemote
is in Playback Mode. The playback controls toolbar is on the main window,
as shown in the following figure.
All Rights Reserved Powered by Free Document Search and Download
Copyright © 2011